Finger Pulse Oximeter Parameters

ign="center">Hypoxemia. Unhealthy and unsafe level.
Finger Pulse Oximeter Parameters - OctiveTechSpo2 < 70%
300-seriesY
1. OverviewExtreme lack of oxygen, ischemic diseases may
This document contains an overview of suggestedoccur. The OctiveTech 300-series of Oximeters is not
operating parameters for the OctiveTech series ofcalibrated to detect readings lower than 70%.
Finger Pulse Oximeters ( document is intended to3.2 Resting Pulse Rate
be a guide only, and should not be used as a substituteMeasurement
for clinical diagnosis performed by a licensedCritical
practitioner.Notes
2. Extended SpecificationsPR
Spo2 MeasurementsY
Pulse RateBelow healthy resting heart rates. OctiveTech
Range: 0% - 100%300-series does not detect pulse rates lower than
Resolution: 1%30BMP.
30-254 BPMPR 40-60 BPM
Resolution: ±1bpmY/N
Accuracy: 80% - 99%, ±2%Resting heart rate for sleeping.
Accuracy: ±2bpm or ±2%PR 60-100 BPM
Accuracy: 70% - 79%, ±3%N
Accuracy: 0% - 69%, unspecifiedHealthy adult resting heartrate.
3. Measurement InterpretationPR 100 BPM – 220 BPM
This section contains a guideline on various levels ofY
blood oxygen and heart rate that are within tolerableAcceptable if measured during exercise. Not
ranges.acceptable if resting heartrate.
3.1 Oxygen SaturationPR > 220 BPM
MeasurementY
CriticalAbnormally high heart rate. The OctiveTech 300-series
Notesdoes not detect heart rates > 254 BPM.
Spo2 > 95%Disclaimer:
NThe information on this website aims to provide
Normal healthy individualcustomers with relevant knowledge regarding our
Spo2 91% - 95%products. Under no circumstances should the
Ninformation be used for therapeutic purposes.
Clinically acceptable, but low. Patient may be a smoker,Customers must consult their doctors for the correct
or be unhealthy.use of these information and products. is not
Spo2 70% - 90%responsible for any losses or accidents caused by the
Yuse of information on this website.